 |
When you unpack the parts you have 4 long tubes and 15 shorter tubes you would then assemble them as shown in the photos below. You will need 4 for the corners and 2 for the door opening and then 9 for the other 3 walls |
 |
Then you lay out the 4 longer tubes in a square and fasten the 4 corner tubes in place, then the wall tubes then the 2 door frame tubes as pictured below .You do have a choice as to where in the wall you place the door center left of center or right of center. |
 |
| Now you lay out the roof supports to form a square and then assemble them as seen below. |
 |
| Once you have the roof support bolted together you would place it on top the wall tubes and fasten in place. The wood is there to support and fasten the roof panels to.When you are done it should look like the bottom picture |
 |
| Now you are ready to install the siding and mount the mounting ring on top the roof support |
 |
 |
| Now you are ready to install the roof panels |
 |
 |
